Upload UV-DTF Sticker Gang Sheet
In short: The Upload UV-DTF Sticker Gang Sheet from Roman Empire Print Shop lets you send your own print-ready layout and receive UV DTF transfers that stick directly to hard surfaces like tumblers, phone cases, metal, glass and wood with no heat press. It is for crafters, tumbler makers and small businesses who already design their own sheets, with sizes from 22" x 12" ($17.99) up to 22" x 300" ($239.99) and no minimum order.
Upload Your UV DTF Gang Sheet — Print-Ready Files
Already have your file laid out? Upload your print-ready UV DTF gang sheet and we'll get it on press fast. No heat press needed — these transfers stick directly to hard surfaces like tumblers, cups, phone cases, metal, plastic, and glass.
| 🖨️ Commercial production equipment | 💧 Peel and stick, no heat press needed | ⚡ Order by 12 PM MT, ships same day | 🙋 Real print shop support if you need help |
|
✅ FAST TURNAROUND |
✅ PROFESSIONAL QUALITY |
✅ REAL PRINT SHOP SUPPORT |
✅ NO MINIMUMS |
🆕 COMPATIBLE SURFACES
- ✅ Tumblers & drinkware (Stanley, YETI, Owala, etc.)
- ✅ Phone cases
- ✅ Metal & aluminum
- ✅ Plastic & acrylic
- ✅ Glass & ceramic
- ✅ Wood & MDF
- ❌ Does NOT work on fabric — use standard DTF for apparel
📁 FILE REQUIREMENTS
| 📄 Format | PNG (preferred) or PDF |
| 🖨 Resolution | 300 DPI minimum |
| 🎨 Color Mode | RGB |
| ▪ Background | Transparent (no white background) |
| 📐 Max Width | 22 inches |
⚠️ We print exactly what you send. Double-check your file before uploading.
✅ WHY ROMAN EMPIRE PRINT SHOP
- No heat press required — peel and stick application
- Vibrant, waterproof, scratch-resistant finish
- No minimums — order any size
- Real print shop production — not a middleman
- Wholesale & dealer pricing available
Transfers only — substrates not included. Maximum print width 22 inches. By ordering, you confirm you own the rights to all artwork submitted.
⚙ HOW TO APPLY (NO HEAT)
- Room temperature — no heat press. Make sure the surface is clean and dry.
- Peel the backing off in the same direction the sheet is rolled — follow the roll. Never peel sideways, especially on large designs.
- Apply it like a transfer: start at one end and lay it down as you unroll it, pressing it on with a squeegee or a firm, sharp-edged piece of plastic.
- Let it sit on the item for about a minute for the best adhesion.
- Remove the top film slowly, again in the direction of the roll — not sideways.
- Press and hold any loose spots for 5–10 seconds.
- If any part comes up with the film, press it back down firmly for a few seconds, then pull again. Repeat until the design stays on the item.
Quick answers
What sizes and prices are available for the upload UV DTF gang sheet?
Sizes are 22" x 12" ($17.99), 22" x 24" ($24.99), 22" x 36" ($34.99), 22" x 48" ($44.99), 22" x 60" ($54.99), 22" x 72" ($64.99), 22" x 96" ($74.99), 22" x 150" ($124.99) and 22" x 300" ($239.99). The per-square-inch rate drops from $0.07 on the smallest sheet to $0.03 on the 22" x 300" sheet.
What file type should I upload?
Send a PNG (preferred) or PDF at 300 DPI minimum in RGB color mode with a transparent background. Anything left in the background will print, and the maximum print width is 22 inches.
Do I need a heat press for UV DTF transfers?
No. UV DTF needs no heat: peel it with the roll (never sideways) and press it on with a squeegee. If you are printing on fabric, you need standard DTF instead, which presses at 290-300 degrees F for 7-12 seconds, hot peel, then a repress of 5-10 seconds with a textured Teflon sheet (or a similar pressing sheet).
What surfaces do these stickers work on?
Tumblers and drinkware such as Stanley, YETI and Owala, phone cases, metal and aluminum, plastic and acrylic, glass and ceramic, and wood or MDF. They do not work on fabric.
Is there a minimum order?
No minimums. You can order a single gang sheet or as many as you need, and wholesale and dealer pricing is available.
How fast do orders ship?
Gang sheets and transfers ordered by 12 PM Mountain time (Mon–Fri) ship the same day by 4:30 PM (orders over 500 inches of film: as fast as we can, not guaranteed same day) from the production facilities in Great Falls, Montana and Santaquin, Utah, and ship nationwide.
How do I lay out my gang sheet so it cuts clean?
Keep every design within the 22-inch maximum print width and leave about a quarter inch of space between designs. Build artwork at 300 DPI at final print size, since upscaling a small file softens it.
Who do I contact with questions about my file?
Text or call Roman Empire Print Shop at 406-402-7912 or email support@romanempireprinting.com, Monday through Friday, 9am to 4pm Mountain time. Files are printed exactly as submitted, so check yours before uploading.
Free shipping on orders over $100 · Questions? Call or text 406-402-7912